X server for Win32 has encountered a problem and needs to close

When trying to open up GAMBIT or FIDAP this error message appears and GAMBIT or FIDAP will not start up. X server for Win32 has encountered a problem and needs to close.
Resolution 1:

If you are using Hummingbird Exceed version 11 you will need to download and install the latest Hummingbird Exceed patches.
If you are not using Hummingbird Exceed version 11 uninstall your existing version and download version 11 with the patches.

<a target=_blank href="http://www.fluentusers.com/support/installation/winfaq/exceed_patches.htm">http://www.fluentusers.com/support/installation/winfaq/exceed_patches.htm</a>http://www.fluentusers.com/support/installation/winfaq/exceed_patches.htm

Resolution 2: Disable XInputExtension:

Start, Programs, Hummingbird Connectivity 2006, Exceed Tools, XConfig.
Choose the X Server Protocol
Choose the Extensions tab
In the "Enable Extensions" column, deselect the XInputExtension option.

Question : What is the significance of having XInputExtensions disabled?

When "XInputExtension" is enabled in Xconfig, Exceed will check the computer's COM ports to see what Xinput devices are attached in order to communicate with the device. However, if the COM port is occupied by a non-Xinput device (ie. a printer), the communication process goes into a dead loop and Exceed will hang.

There is nothing that can be done as Exceed needs to query the COM ports for an Xinput device. The only solution is to ensure that only Xinput devices are connected to the COM port or to disable XInputExtension.

Show Form
No comments yet. Be the first to add a comment!